Custom-made wave curtains on the Costa Blanca

Made-to-measure wave curtains on the Costa Blanca offer compact light and privacy control close to the window. For customers seeking an even, modern curtain wave for wide windows and sliding doors, the fabric, profiles, operation, and window function must be designed as one system.

This guide covers made-to-measure wave curtains with ceiling tracks, wall tracks, in-between fabrics, and blackout fabrics for the Costa Blanca, helping you make a beautiful and technically suitable choice on the Costa Blanca.

Made-to-measure pleated and Duette: start with the window

Pleated and Duette systems are compact and versatile, but the final result depends heavily on the window profile, operation, fabric properties, and installation. A beautiful sample alone says nothing about clear window operation or evening privacy.

For customers seeking an even, modern curtain wave for wide windows and sliding doors, the aim is to carefully combine the fabric, wave spacing, track, return, floor clearance, stack, and opening direction. That is why we assess the function first and only then the colour, pleat height, profile, and technical execution.

Make a priority list for each window covering privacy, light, heat, blackout performance, and operation. This prevents an attractive fabric from being chosen before the most important function has been technically resolved.

At Wave Curtains Costa Blanca, we carefully combine this aspect with the fabric, wave spacing, track, return, floor clearance, stack and direction of travel. Record the choices for each window in writing so that the fabric, profile and operation are not based on assumptions during production and installation.

The difference between pleated and Duette

A pleated fabric consists of a single folded layer. Duette uses a honeycomb construction with air chambers and often internally concealed cords. This creates a different appearance and can affect comfort and light control.

For wave curtains, we compare not only names but also visible cord holes, cell structure, stack, fabric tension, maintenance, and suitability for the desired shape.

View both materials at full scale. Duette’s honeycomb structure looks calmer because the internal cords are less visible, while a single pleated fold often appears lighter and finer.

Transparent, light-filtering, dim-out, or blackout

Fabrics differ in transparency, colour, coating, and density. Transparent fabrics retain more contact with the outdoors; light-filtering fabrics soften the light; dim-out fabrics reduce it more strongly; and blackout fabrics allow virtually no light through the material.

For living rooms, bedrooms, villas, apartments, new-build homes, tall windows, and sliding doors, we assess materials, fabrics, profiles, and transparencies that suit the space, solar exposure, privacy requirements, and desired look. Test the actual sample against the window at several times of day, because evening lighting can greatly change privacy and colour.

Ask about the back and any coating. Two fabrics that look identical on the room side can differ significantly on the outside, in bright sunlight, and in terms of heat performance.

Top-down bottom-up and privacy

A movable top and bottom profile makes it possible to screen the middle of the window while allowing daylight in at the top. This is useful for street-facing windows, bathrooms, and homes opposite yours.

Determine the privacy height both when seated and standing. For Costa Blanca wave curtains, the desired intermediate position must be reachable, stable and practical for everyday use.

With the interior lights on, also walk past the window outside. This simple practical test gives a more accurate impression of privacy than general terms in a catalogue.

Insulation, sun and heat

Duette honeycomb fabric can create an additional layer of air on the inside of the glass. The actual effect depends on the fabric, cell, mounting, gap, glazing and use. Internal sun shading remains thermally different from external sun shading.

In strong sunlight, we also compare screens or shutters. Choose the rail and wave spacing together with the fabric, and have the complete stack drawn in next to the active door. This prevents claims that a single product cannot fulfil under all circumstances.

Close the internal sun shading before the glass and room have fully warmed up. Timely use helps maintain comfort, but does not replace suitable glazing, ventilation or external sun shading.

Accurate measuring

Measure the width and height at several points and check that the glazing beads and reveals are straight. Clearly specify whether the measurement is taken across the glass, between the glazing beads, on the sash or across the complete frame.

For this application, we check the rail spacing, fabric volume, wave cord, return, active door, air conditioning, windowsill, ceiling and stack space. With multiple adjoining systems or unusual windows, professional measuring is the safest option.

For multiple windows, use a measurement sheet with unique window codes. Similar-looking frames often differ by a few millimetres in the glazing bead, handle or clear opening space.

Profiles, cords and tension cords

Top, bottom and intermediate profiles determine how the system moves. Tension cords keep window-mounted configurations stable in tilt-and-turn positions. The profile colour influences the overall look just as strongly as the fabric.

Check the fixing points, clear space around handles and the alignment of all profiles. A slight misalignment is immediately visible on horizontal components.

Choose the profile colour deliberately. A profile in the frame colour disappears visually; contrast emphasises the horizontal lines and can visually divide a small window.

Mounting on the glazing bead, sash, wall or ceiling

Mounting close to the glass is compact and often moves with the window. Wall or ceiling mounting can provide more overlap, but requires clearance for the window sash, stack and controls.

The suitable configuration may be in the reveal, on the frame, wall or ceiling, with appropriate fixings and sufficient clearance for windows, doors, air conditioning and shutters to operate freely. Mark out the position beforehand and test each opening window in its furthest position.

Check the actual substrate before choosing fixings. Plastic, aluminium, wood, stone and hollow walls each require a different mounting approach.

Stack height and clear window opening

Raised pleated fabric disappears into a compact stack, but not completely. The height, fabric type, number of layers, and profiles determine how much space is needed at the top.

For doors and tall windows, the stack must be able to remain outside the clear opening. Ask for the expected dimensions rather than assuming a small showroom sample.

View the product fully open, half-open, and closed. The frequently used intermediate position is precisely what determines whether the stack, handle, and sightline are comfortable in everyday use.

Manual, Cordless, or Electric Operation

The possible operating methods are manual operation, safe operation, or motorization, depending on the system, size, weight, power supply, and daily use. Handles are intuitive when they remain accessible; cords require safety devices; motorization helps with height or multiple systems.

Document who will use the product, which intermediate positions are needed, and whether the controls remain accessible behind furniture, a bathtub, kitchen counter, or desk.

For motorized systems, the end positions, groups, transmitters, and power supply must be tested and documented during handover. Also retain information about charging, resetting, and manual emergency operation.

Child Safety

Loose cords and loops must remain out of children’s reach. Use the prescribed safety devices or choose cordless or motorized operation where possible.

Do not place a bed, cot, or climbing furniture near the operating mechanism. Safety remains part of the installation and must not be removed for a cleaner appearance.

After installation, check all safety devices and do not rearrange the furniture in a way that would allow a child to reach cords or moving profiles.

Moisture and Ventilation

Not every fabric, coating, or profile combination is suitable for prolonged condensation or splashing. Even moisture-resistant window coverings require ventilation and proper drying.

Check the exact material recommendations. Do not leave a wet system rolled or folded compactly for extended periods, and install electrical components only where technically permitted.

Ensure bathroom and kitchen windows are ventilated adequately. Moisture trapped between the fabric, glass, and profile for extended periods can accelerate soiling and material stress.

Casement, Tilt-and-Turn, and Sliding Windows

Window coverings must preserve the window’s original function. Check the handle, tilt angle, ventilation grille, insect screen, and any collision with the recess or adjacent sash.

For wave curtains, window-mounted installation can be very practical, provided the profile and track are compatible. Always test the window fully open before production.

Open each window as far as possible during the survey. A difference of a few centimeters can determine whether the window covering, insect screen, ventilation, or cleaning will function smoothly later.

Special and Unusual Window Shapes

Plissé and Duette are available for some triangular, trapezoidal, or roof windows, but not every shape can open fully or use the same operating method.

A template, drawing, or specialist site survey may be necessary. Discuss in advance which part moves and where a fixed section of fabric will remain visible.

For unusual shapes, request a clear sketch showing the open and closed positions. A system can be made to fit, although its mobility may be more limited than with a rectangle.

Combining curtains and solar shading

A window-mounted system can provide privacy and regulate sunlight during the day, while curtains soften the entire wall and provide additional closure in the evening. Shutters or screens can perform a different thermal function outside.

A useful comparison includes curtains, roller blinds, venetian blinds, pleated blinds, Duette blinds, and other suitable window coverings. Combine systems only when they serve different functions and do not interfere with each other during movement and maintenance.

Allow sufficient space when planning double window coverings. Curtain fabric should not constantly rub against profiles, and both systems must remain accessible for cleaning and servicing.

Color, texture, and profile finish

A light fabric looks airy but may appear brighter when backlit; dark colors create a stronger visual block. Profiles, handles, and cords should be deliberately matched to the window frame or fabric.

View samples vertically alongside the floor, wall, and window frame. The undertone of white, sand, and gray is strongly influenced by the warm daylight on the Costa Blanca.

Order visible components as one matching color package. White is not always the same white, and warm-gray profiles can stand out noticeably next to a cool aluminum window frame.

Maintenance and lifespan

Dust the fabric regularly and gently, and follow the care instructions exactly. Not every pleated or coated fabric may be washed or cleaned with water.

Do not force the profiles if a cord, handle, or fabric gets caught somewhere. Correcting the problem early prevents permanent creases or uneven movement.

Keep the fabric name, color number, system type, and control information. This makes future extensions or replacements much easier and prevents having to search using only an old photo.

Avoid common mistakes

A major risk is hanging wave curtains on a standard track or leaving too little space between the track, glass, handle, and fabric. Other mistakes include forgetting the system depth, measuring the window only when closed, failing to choose a profile color, and assessing blackout performance solely by the fabric name.

Work in a fixed order: function, window type, fabric, control method, installation, measurement check, and only then production. Custom-made products cannot easily be returned after a measurement error.

Have a second person check the complete order line for each window: size, configuration, fabric, profile, control method, opening direction, and installation. This check prevents costly custom-measurement errors.

What determines the price?

Price depends on width, height, fabric group, configuration, number of profiles, control method, motorization, and installation. Unusual shapes and substantial heights require additional engineering and on-site assessment.

For an indication, send photos, approximate measurements, location and intended use. The specifications and complete price can be confirmed after final measuring.

Only compare quotations when the fabric group, system, operation, installation and electrical preparation are described on an equal basis. A bare product price is not a complete made-to-measure solution.

Advice and installation from La Nucía

Port of Altea provides advice from the showroom in La Nucía and works across a large part of the Costa Blanca.

We take strong sunlight, roller shutter boxes, air conditioning, tiled surfaces, concrete substrates and frequently used patio doors into account. This ensures that the solution fits not only on paper but also in the home.

Bring overview photos of the entire room to the showroom. This makes it possible to assess scale, colour, privacy and how everything coordinates with the furniture and curtains at the same time.

All pages about wave curtains, curtains by location and suitable tracks

Use this overview to go directly to the solution, situation or location that suits your home. All pages belong to the same advice network and link back to central product and contact information.

Frequently asked questions

Are wave curtains on the Costa Blanca fully custom-made?

Yes. The size, fabric, profiles, opening method, operation, and installation are tailored to the window.

What is the difference between pleated blinds and Duette?

Pleated blinds have a single folded fabric layer; Duette has a honeycomb structure with air pockets and generally fewer visible cord holes.

Can the system open top-down and bottom-up?

Often, yes. The available configuration depends on the window type, size, fabric, and chosen system.

Are pleated blinds and Duette blackout blinds?

Blackout fabric can block a great deal of light, but light gaps may remain around the profiles.

Can they be installed without drilling?

For suitable window profiles and sizes, clamp-on or adhesive solutions are available. Not every window frame is suitable for this.

Are they suitable for tilt-and-turn windows?

Yes. Window-mounted systems with guides are often very suitable, provided the handle and full window operation are checked.

Can Duette be operated electrically?

Often, yes. The options depend on the size, configuration, power supply, and desired opening direction.

Are they suitable for bathrooms?

Only with explicitly moisture-resistant fabric and components, away from direct water jets and with good ventilation.

Which areas do you deliver to?

Yes. We work across much of the Costa Blanca, depending on location, scheduling, and project scope.

How do I request a price estimate?

Send photos, approximate dimensions, location, and intended use. The final price can be confirmed after selection and measuring.

Want custom-made wave curtains on the Costa Blanca?

Visit our showroom in La Nucía or send photos, approximate dimensions, and your requirements. We advise on fabric, profiles, operation, measuring, and installation.

Request advice or a price estimate

Language