Custom-made in-between curtains on the Costa Blanca

Made-to-measure inbetween curtains on the Costa Blanca provide compact light and privacy control close to the window. For clients who want to combine daylight, softness, and privacy without completely blocking the view, the fabric, profiles, operation, and window function must be designed as one system.

This guide covers inbetween, voile, and transparent wave curtains on the Costa Blanca and helps you make a beautiful yet technically suitable choice on the Costa Blanca.

Made-to-measure pleated and Duette systems: start with the window

Pleated and Duette systems are compact and versatile, but the final result depends greatly on the window profile, operation, fabric properties, and installation. A beautiful sample alone says nothing about unobstructed window operation or evening privacy.

For clients who want to combine daylight, softness, and privacy without completely blocking the view, the aim is to carefully coordinate transparency, colour, pleat, fabric volume, track, and evening privacy. We therefore assess the function first, and only then the colour, pleat height, profile, and technical execution.

Create a list of priorities for each window, covering privacy, light, heat, blackout performance, and operation. This prevents an attractive fabric from being chosen before the most important function has been technically resolved.

For in-between curtains on the Costa Blanca, we carefully coordinate this element in relation to transparency, colour, pleat, fabric volume, track and evening privacy. Record the choices for each window in writing, so that fabric, profile and operation are not based on assumptions during production and installation.

The difference between pleated and Duette

A pleated fabric consists of a single folded layer. Duette uses a honeycomb construction with air pockets and often internally concealed cords. This creates a different appearance and can affect comfort and light control.

For inbetween curtains, we compare not only the names but also visible cord holes, cell structure, stack, fabric tension, maintenance, and suitability for the desired shape.

View both materials at full scale. Duette’s honeycomb structure looks calmer because the internal cords are less visible, while a single pleated fold often appears lighter and finer.

Transparent, light-filtering, dim-out, or blackout

Fabrics differ in transparency, colour, coating, and density. Transparent fabrics preserve more contact with the outdoors; light-filtering fabrics soften the light; dim-out fabrics reduce it more strongly; and blackout fabrics allow virtually no light through the material.

For living rooms, villas, apartments, sliding doors, tall windows, and windows with a view, we assess materials, fabrics, profiles, and transparencies that suit the space, sun exposure, privacy needs, and desired appearance. Test the actual sample against the window at different times, because evening lighting can greatly change privacy and colour.

Ask about the backing and any coating. Two fabrics that look identical from the room side may differ significantly outdoors, in bright sunlight, and in terms of heat performance.

Top-down bottom-up and privacy

A movable top and bottom profile makes it possible to screen the middle of the window while allowing daylight in at the top. This is useful for street-facing windows, bathrooms, and homes opposite one another.

Determine the privacy height both when seated and standing. For Costa Blanca in-between curtains, the desired intermediate position must be accessible, stable, and practical for everyday use.

Walk past the window outside with the interior lights on as well. This simple practical test provides a more accurate impression of privacy than general terms in a catalogue.

Insulation, sunlight, and heat

The honeycomb structure of Duette can create an additional air layer on the inside of the glass. The actual effect depends on the fabric, cell, mounting, gap, glazing, and use. Interior sun protection remains thermally different from exterior sun protection.

In strong sunlight, we also compare screens or shutters. Test every in-between blind in daylight and evening lighting and, if necessary, combine it with a second closing layer. This prevents claims that a single product cannot fulfil under all circumstances.

Close the interior sun protection before the glass and room have fully warmed up. Timely use helps maintain comfort, but does not replace suitable glazing, ventilation, or exterior sun protection.

Accurate measuring

Measure the width and height at several points and check that the glazing beads and recesses are straight. Clearly specify whether the measurement is taken across the glass, between the glazing beads, on the sash, or across the complete window frame.

For this application, we check the sightline, evening light, light-blocking properties, wave spacing, stack, sunlight, rail, and floor clearance. With multiple adjoining systems or unusual windows, professional measuring is the safest option.

For multiple windows, use a measurement sheet with unique window codes. Window frames that look identical often differ by a few millimetres in the glazing bead, handle, or available opening space.

Profiles, cords, and tensioned cords

Top, bottom, and intermediate profiles determine how the system moves. Tensioned cords keep window-mounted versions stable in tilt-and-turn positions. The profile colour influences the overall appearance just as much as the fabric.

Check the fixing points, clear space around the handles, and the alignment of all profiles. A slight misalignment is immediately visible in horizontal components.

Choose the profile colour carefully. A profile in the colour of the window frame blends in visually; contrast emphasizes the horizontal lines and can visually divide a small window.

Mounting on the glazing bead, sash, wall, or ceiling

Mounting close to the glass is compact and often moves with the window. Wall or ceiling mounting can provide more overlap, but requires clearance for the window sash, stack, and operation.

The suitable configuration is in the reveal, on the frame, wall, or ceiling, with suitable fixings and unobstructed operation of windows, doors, air conditioning, and roller shutters. Mark out the position in advance and test every moving window in its fully open position.

Check the actual substrate before selecting fixing materials. Plastic, aluminum, wood, stone, and hollow walls each require a different installation approach.

Package height and clear window opening

A raised pleated blind retracts into a compact package, but not completely. Height, fabric type, number of layers, and profiles determine how much space is needed at the top.

With doors and tall windows, the package must be able to remain outside the clear opening. Ask for the expected dimensions instead of assuming a small showroom sample.

View the product fully open, half open, and closed. The frequently used intermediate position in particular determines whether the package, handle, and sightline are comfortable in everyday use.

Manual, cordless, or electric

The possible operation is manual, safe corded operation, or motorized operation according to the system, size, weight, power supply, and daily use. Handles are intuitive when they remain accessible; cords require safety devices; motorization helps with height or multiple systems.

Document who uses the product, which intermediate positions are needed, and whether operation remains accessible behind furniture, a bathtub, kitchen counter, or desk.

For motorization, the end positions, groups, transmitters, and power supply must be tested and documented during handover. Also retain information about charging, resetting, and manual emergency operation.

Child safety

Loose cords and loops must remain out of children's reach. Use the prescribed safety devices or, where possible, choose cordless or motorized operation.

Do not place a bed, crib, or climbing furniture near the controls. Safety remains part of the installation and must not be removed for a cleaner appearance.

After installation, check all safety features and do not rearrange the furniture in a way that could still allow a child to reach cords or moving profiles.

Moisture and ventilation

Not every fabric, coating, or profile combination is suitable for prolonged condensation or splashing water. Even moisture-resistant window coverings require ventilation and proper drying.

Check the exact material recommendations. Do not roll or fold a wet system up compactly for extended periods, and install electrical components only where technically permitted.

Ensure bathroom and kitchen windows are ventilated sufficiently. Moisture that remains trapped between fabric, glass, and profile for extended periods can accelerate soiling and material stress.

Tilt-and-turn and sliding windows

Window coverings must preserve the window's original function. Check the handle, tilt angle, ventilation grille, insect screen, and any collision with the recess or adjacent sash.

For in-between curtains, window-mounted installation can be very practical, provided the profile and guiding system are compatible. Always test the window fully open before production.

Open each window as far as possible during the survey. A difference of a few centimeters can determine whether the window covering, insect screen, ventilation, or cleaning will function smoothly later.

Special and unusual window shapes

Pleated blinds and Duette are available for some triangular, trapezoidal, or roof windows, but not every shape can open fully or use the same operating method.

A template, drawing, or specialist survey may be necessary. Discuss in advance which part moves and where a fixed section of fabric will remain visible.

For unusual shapes, request a clear drawing showing the open and closed positions. A system can be made to fit, while its range of movement may be more limited than with a rectangle.

Combining curtains and solar shading

A window-mounted system can provide privacy and control sunlight during the day, while curtains soften the entire wall and provide additional closure in the evening. Shutters or screens can serve a different thermal purpose outside.

A useful comparison includes curtains, roller blinds, venetian blinds, pleated blinds, Duette, and other suitable window coverings. Combine systems only when they serve different functions and do not interfere with each other during operation or maintenance.

Allow sufficient space when planning double window coverings. Curtain fabric should not constantly rub against profiles, and both systems must remain accessible for cleaning and servicing.

Color, texture, and profile finish

A light fabric looks airy but may appear brighter in backlight; dark colors create a stronger solid surface. The profile, handle, and cords should be deliberately matched to the window frame or fabric.

View samples vertically next to the floor, wall, and window frame. The undertone of white, sand, and gray is strongly influenced by the warm daylight on the Costa Blanca.

Order visible components as one color package. White is not always the same shade of white, and warm-gray profiles can contrast noticeably with a cool aluminum window frame.

Maintenance and lifespan

Dust carefully and regularly, and follow the maintenance instructions exactly. Not every pleated or coated fabric may be washed or cleaned with water.

Do not force the profiles when a cord, handle, or fabric gets caught somewhere. Correcting the issue early prevents permanent creases or misalignment.

Keep the fabric name, color number, system type, and operating information. This makes future extensions or replacements much easier and prevents having to search using only an old photo.

Avoid common mistakes

A key risk is seeing sufficient privacy during the day and assuming that the same fabric will remain equally opaque in the evening with the lights on. Other mistakes include forgetting the system depth, measuring only with the window closed, failing to choose the profile colour and judging blackout performance solely by the fabric name.

Work in a fixed order: function, window type, fabric, operation, installation, measurement check and only then production. Made-to-measure products cannot easily be returned after a measuring error.

Have a second person check the complete order line for each window: dimensions, design, fabric, profile, operation, opening direction and installation. This check prevents costly made-to-measure errors.

What determines the price?

The price depends on width, height, fabric group, design, number of profiles, operation, motorisation and installation. Unusual shapes and great heights require additional technology and a site survey.

For an indication, send photos, approximate dimensions, location and intended function. The specification and complete price can be confirmed after final measurement.

Compare quotations only when the fabric group, system, operation, installation and electrical preparation are described in the same way. A bare product price is not a complete bespoke solution.

Advice and installation from La Nucía

Port of Altea provides advice from its showroom in La Nucía and works across a large part of the Costa Blanca.

We take strong sunlight, roller shutter boxes, air conditioning, tiled surfaces, concrete substrates and frequently used patio doors into account. This means the solution fits not only on paper but also in the home.

Bring overview photos of the entire room to the showroom. This allows scale, colour, privacy and coordination with furniture and curtains to be assessed at the same time.

All relevant pages about sheer curtains, voiles and lightweight curtains

Use this overview to go directly to the solution, situation or location that suits your home. All pages belong to the same advice network and link back to central product and contact information.

Frequently asked questions

Are in-between curtains in the Costa Blanca fully made to measure?

Yes. The dimensions, fabric, profiles, opening method, operation, and installation are tailored to the window.

What is the difference between pleated blinds and Duette?

Pleated blinds have a single folded layer of fabric; Duette has a honeycomb structure with air pockets and generally fewer visible cord holes.

Can the system open top-down bottom-up?

Often, yes. The available configuration depends on the window type, dimensions, fabric, and chosen system.

Are pleated blinds and Duette blackout blinds?

Blackout fabric can block a great deal of light, but light gaps may still remain around the profiles.

Can they be installed without drilling?

With suitable window profiles and dimensions, clip-on or adhesive solutions are available. Not every window frame is suitable for this.

Are they suitable for tilt-and-turn windows?

Yes. Window-mounted systems with guides are often highly suitable, provided the handle and full window operation are checked.

Can Duette be operated electrically?

Often, yes. Options depend on the size, configuration, power supply, and desired opening direction.

Are they suitable for bathrooms?

Only with explicitly moisture-suitable fabric and components, away from direct water jets and with good ventilation.

Which areas do you deliver to?

Yes. We work across a large part of the Costa Blanca, depending on location, schedule, and project scope.

How do I request a price estimate?

Send photos, approximate measurements, location, and intended function. The final price can be confirmed after selection and measuring.

Have made-to-measure in-between curtains in the Costa Blanca?

Visit our showroom in La Nucía or send photos, approximate measurements, and your requirements. We advise on fabric, profiles, operation, measuring, and installation.

Request advice or a price estimate

Language