LVT herringbone flooring over tiles in La Nucía
This home in La Nucía had tiled flooring throughout. The residents wanted a warmer look, but removing the existing floor was not necessary. We prepared the tiled floor and installed glued LVT herringbone flooring was installed.
First, inspect the existing tiled floor
At first glance, the tiled floor seemed like a good base. During the inspection, we only found a few loose, hollow-sounding tiles. The rooms also the rooms were not all at the same level and there were quite a few curves in the home.
You cannot simply lay LVT over it. Anything that moves beneath the floor or is not flat, this may later become visible in the LVT.
Preparing and levelling the tiled floor
We first secured the loose sections and thoroughly prepared the tiled floor. The entire floor was then levelled. This removed the joints and we could also correct the differences in height between the rooms.
With glued herringbone flooring, the subfloor really must be flat. The strips are relatively small, so imperfections are more noticeable than with a regular straight plank.
Want to know what is involved with this type of subfloor? Read more about LVT over an existing tiled floor and levelling floors in Spain.
Installing the LVT herringbone flooring
Once the levelling compound was dry and flat, the new floor could be installed. For this home, glued LVT, also known as dryback LVT, was chosen. The herringbone pattern was laid from a fixed line and continues through the different rooms in the home.
The round walls and curved doorways made this project particularly special. Each strip along these curves had to be cut individually and made to fit. That takes more time, but it is precisely in the finishing touches that you can see the difference.
Want to know more about the differences between the two systems? Then take a look at our explanation of dryback and click LVT in Spain.
The end result
The old tiled floor is no longer visible anywhere, and the herringbone pattern flows beautifully from one room to another. The calm wood colour gives the home a much warmer look, while the home's rounded shapes are enhanced stand out beautifully.
Also view more information and examples of herringbone LVT flooring on the Costa Blanca.
A new floor over your tiles too?
In many homes on the Costa Blanca, a LVT floor can be installed over the existing tiles are installed. Whether this is possible in your home depends, among other things, depends on the condition of the tiled floor and the available height at doors, stairs and other connections.
We inspect the subfloor, advise you on the right flooring, and take care of the levelling, installing, and finishing. We work in La Nucía, Altea, Albir, Benidorm, and the surrounding area.
Read more about our LVT flooring in La Nucía or view all the information about LVT flooring in Spain. Would you like to know what is possible in your home? Then contact us.
What should you really consider when installing a herringbone LVT floor over tiles in La Nucía?
A good choice does not start with colour alone. We also assess the construction, wear layer, dimensional stability, pattern repetition, and suitability of click or dryback flooring. These factors determine whether a floor remains stable after installation, feels comfortable to walk on, and suits the home's daily use. Especially in an apartment, holiday home, or villa on the Costa Blanca, sun exposure, temperature differences, and an existing tiled floor can influence the technical choice.
Therefore, do not ask only for a price per square metre. Check what is included in the offer: subfloor preparation, levelling, underlay, adhesive, skirting boards, cutting waste, transport, and installation. Two quotes for the same area may technically include completely different work.
The subfloor determines the final result
A new floor always depends on the quality of the base. Loose tiles, deep grout joints, differences in height, residual moisture, and cracks must be assessed beforehand. A level floor is not automatically a suitable floor; stability and adhesion are at least as important. During renovations, we also consider doors, sliding doors, kitchen plinths, and connections to other rooms.
By measuring accurately in advance, we prevent surprises during installation. We record what preparation is required and which system is technically logical. Sometimes direct installation is possible; in other cases, leveling or localized repairs are necessary. You cannot see this honest distinction on a small color sample, but you will see it later in the result.
Quality through Dutch suppliers
Port of Altea imports high-quality collections through Dutch suppliers. This enables us to offer materials with clear technical information, reliable collections, and finishes that are not always available in the local standard range. This does not mean that every expensive floor is automatically good: the product must also suit the space and installation method.
In our showroom in La Nucía, you can view samples in daylight and compare different qualities side by side. If possible, bring photos, a floor plan, and approximate measurements. This allows us to give much more targeted advice on the material, color, pattern, and expected preparation.
Practical checks before you decide
- Which rooms are included, and how intensively will they be used?
- Is there currently tilework, screed, wood, or an existing floating floor?
- Are pets, strong sunlight, or underfloor heating important factors?
- Does the property need to remain accessible during the work?
- Which skirting board, transition, and finish are suitable for the doors and frames?
A complete plan prevents the choice of materials and execution from being ordered separately. For the page about herringbone LVT flooring over tiles in La Nucía, we provide advice, measuring, delivery, and professional installation within our service area on the Costa Blanca.
Explore further and get personal advice
Read more about LVT flooring in Spain, dryback or click LVT, and LVT over tiles. Would you like to know which option suits your home? Contact Port of Altea or visit our showroom in La Nucía. We would be happy to prepare a proposal based on the space, the existing subfloor, and the intended use.
More about flooring on the Costa Blanca
Also view this information about material selection, preparation, and professional installation:
La Nucía showroom
Come and see, feel and compare.
Bring photographs, approximate measurements or a floor plan to our La Nucía showroom. You can also discuss a home consultation or video call with us.
Tue–Fri 09:30–17:00 · Sat 09:30–14:00