Are custom-made insect screens suitable for a holiday home? This is a question we regularly receive at Port of Altea. The short answer rarely consists of just one brand or model. For custom-made insect screens, the property, measurements, sun, wind and daily use all need to be considered together. In this article, we explain how to weigh ease of operation, vacancy, maintenance and remote management.
Start with the problem you want to solve
In a second home, operation must also be clear to guests and property managers. Systems that have not moved for months deserve a calm visual check upon arrival.
Write down which windows, doors or terrace areas are involved, when the problem occurs and who uses the system. A bedroom has different requirements from a rental apartment, a large sliding door or a terrace that is mainly used in the afternoon.
What makes custom-made insect screens technically different?
Custom-made insect screens are designed to allow ventilation without mosquitoes and other insects. The frame, mesh, profile, handle and available space all require attention. Looking only at the visible material is therefore insufficient; the components behind it determine whether the system functions smoothly, safely and reliably.
On the Costa Blanca, direct sunlight, high surface temperatures, gusts of wind and salt or sand often occur together. A product that works well in a sheltered situation may require a different version on a high or exposed terrace.
Measure before making a final choice
Photos and approximate measurements are excellent for an initial discussion, but not for production. We measure the opening at several points and check frames, façades, roller-shutter boxes, door handles, downpipes, windowsills, power points and free movement. On terraces, we also look at the position of the sun, the desired shade and walking routes.
The installation side affects the final dimensions. Installing inside the reveal, on the reveal, against the façade or beneath a ceiling are technically different situations. A centimetre that seems unimportant on paper can determine whether a door still opens in reality.
Operation: practical rather than merely modern
Electric operation is convenient for large or frequently used systems. Solar power avoids new cabling in suitable situations. Manual operation remains logical for small dimensions and simple use. We also discuss who will use the product and whether individual, group or sensor-based operation is desired.
Automation helps, but does not completely remove responsibility. A wind sensor must be positioned and configured correctly and is no guarantee against every sudden gust. If in doubt, retract your exterior sun protection.
What quality is not immediately visible?
Profile thickness, construction, bearings, motor power, fixings, fabric tension and replaceability are not always visible in an inspirational photo. Therefore, ask not only about colour and delivery time, but also about the system structure, limitations and maintenance.
A realistic quotation specifies the exact version, operation and installation. With made-to-measure products, cheap becomes expensive when a product does not quite fit, cannot be properly secured or causes daily irritation.
Maintenance in Spain
Remove loose sand before working with water or a cloth. Clean profiles, guides, fabric or mesh according to the product instructions and do not use aggressive solvents. Do not leave awning fabric rolled up while wet for extended periods, and never force a system that is jammed.
After strong winds, check that everything is straight and moves freely. With motors, unusual noise is a reason to stop. With insect screens, keeping the bottom guide clean prevents the mesh from being loaded unevenly.
Common mistakes
- Ordering with approximate measurements or only a photo.
- Considering wind, sun direction and the installation surface only after choosing the product.
- Comparing a basic internet price with fully installed custom-made work.
- Choosing electric operation without planning the cable route, panel position or controls.
- Continuing to operate a product when it moves stiffly or hangs unevenly.
What changes with an apartment, villa or holiday home?
In an apartment, the rules of the comunidad, access via a lift or balcony and a uniform façade appearance often play a role. With a villa, an exposed location, large widths and multiple façade orientations are more important. For a holiday home, it also matters that guests or property managers can use the system safely without extensive instructions.
This also means that not every opening needs the same product. A bedroom may require blackout shading, a living room may need to preserve the view and a terrace may require a large shaded area. By considering these functions together, the colour and operation can remain consistent while the technology differs for each opening.
When is repair advisable and when should you replace the system?
With a young system that has one worn component, repair may be the logical choice. This could involve adjustment, a motor, an operating component or locally damaged mesh. When profiles are bent, several components show wear or spare parts are no longer available, replacement may ultimately be more reliable and cost-effective.
First, have the cause of the problem identified. Replacing only a motor will not help if a roller shutter runs unevenly; installing new fabric will not solve poor anchoring. The cause must be addressed before a new component is subjected to the same load again.
How do you assess samples and examples?
View fabric, profiles or mesh outdoors and at different times of the day. Bright sunlight makes colours appear lighter and shows the texture differently from artificial light in a showroom. With screen fabric, the view from inside to outside is also important. With insect mesh, pay attention to transparency, strength and the distance at which the mesh remains visible.
Also ask how a large product is divided. A small sample says nothing about seams, box dimensions, posts or the ratio between width and projection. A technical drawing or clear confirmation of the dimensions prevents surprises after production.
Practical checklist for your appointment
- Take photos from inside and outside.
- Note the approximate width, height and desired operation.
- Indicate when sun, wind or insects cause the most inconvenience.
- Mention existing roller shutters, sun protection and power points.
- Discuss access, floor level and permission from the comunidad.
Advice and installation on the Costa Blanca
Port of Altea combines product advice with professional measuring and installation. Visit our page about custom-made insect screens, discover the full range of exterior sun protection and insect screens or make an appointment at our showroom in La Nucía.