How do you choose custom insect screens for a home in Spain? This is a question we regularly receive at Port of Altea. The short answer rarely consists of just one brand or model. For custom insect screens, the property, measurements, sun, wind and daily use must be considered together. In this article, we explain how to make a systematic choice based on the property, opening and daily use.
Start with the problem you want to solve
Do not start with colour or price, but with the function. Note when sun, insects or privacy are genuinely a problem and which opening is used every day.
Write down which windows, doors or terrace areas are involved, what time the problem occurs and who uses the system. A bedroom has different requirements from a rental apartment, a large sliding door or a terrace that is mainly used in the afternoon.
What makes custom insect screens technically different?
Custom insect screens are designed to allow ventilation without mosquitoes and other insects. The frame, mesh, profile, handle and available space therefore require attention. Looking only at the visible material is insufficient; the components behind it determine whether the system functions smoothly, safely and reliably.
On the Costa Blanca, direct sunlight, high surface temperatures, gusts of wind and salt or sand often occur together. A product that works well in a sheltered situation may require a different version on a high or exposed terrace.
Measure before making your final choice
Photos and approximate measurements are excellent for an initial discussion, but not for production. We measure the opening at multiple points and check frames, façades, roller-shutter boxes, door handles, downpipes, windowsills, power points and clearance for movement. On terraces, we also consider the position of the sun, the desired shade and walking routes.
The installation side affects the final dimensions. Installation within the reveal, on the face of the wall, against the façade or beneath a ceiling are technically different situations. A centimetre that seems unimportant on paper may determine whether a door can still open in practice.
Operation: practical rather than merely modern
Electric operation is convenient for large or frequently used systems. Solar power avoids the need for new cabling in suitable situations. Manual operation remains logical for small dimensions and simple use. We also discuss who will use the product and whether operation per unit, per group or with sensors is desired.
Automation helps, but does not completely remove responsibility. A wind sensor must be installed and configured correctly and is not a guarantee against every sudden gust. If in doubt, retract your external sun shading.
Which aspects of quality are not immediately visible?
Profile thickness, construction, bearings, motor power, fixings, fabric tension and replaceability are not always visible in a lifestyle photo. Therefore, ask not only about colour and delivery time, but also about system construction, limitations and maintenance.
A realistic quotation specifies the exact version, operation and installation. With made-to-measure products, cheap becomes expensive especially when a product does not quite fit, cannot be properly secured or causes daily frustration.
Maintenance in Spain
Remove loose sand before using water or a cloth. Clean profiles, guides, fabric or mesh according to the product instructions and do not use aggressive solvents. Do not leave sun-screening fabric rolled up while wet for extended periods, and never force a system that is jammed.
After strong winds, check that everything is straight and moves freely. With motors, unusual noise is a reason to stop. With insect screens, keeping the bottom guide clean prevents the mesh from being loaded unevenly.
Common mistakes
- Ordering with approximate measurements or only a photo.
- Considering wind, sun direction and the installation surface only after choosing the product.
- Comparing a bare internet price with fully installed custom work.
- Choosing electric operation without planning the cable route, panel position or controls.
- Continuing to operate a product when it runs stiffly or hangs crooked.
What changes for an apartment, villa or holiday home?
In an apartment, the rules of the comunidad, access via a lift or balcony and a uniform façade appearance often play a role. For a villa, an exposed location, large widths and multiple façade orientations are more important. For a holiday home, it is also important that guests or property managers can use the system safely without extensive instructions.
This also means that not every opening needs the same product. A bedroom may require blackout shading, a living room may need to retain the view and a terrace may require a large shaded area. By considering these functions together, colour and operation can remain consistent while the technology varies from one opening to another.
When is repairing sensible and when is replacement better?
With a relatively new system that has one worn component, repair may be the logical choice. This could involve adjustment, a motor, an operating component or locally damaged mesh. When profiles are bent, several components show wear or spare parts are no longer available, replacement may ultimately be more reliable and cost-effective.
First, have the cause of the problem identified. Replacing only a motor will not help if a roller shutter runs crooked; fitting new fabric will not solve poor anchoring. The cause must be addressed before a new component is subjected to the same strain again.
How do you assess samples and examples?
View fabric, profiles or mesh outdoors and at different times of day. Bright sunlight makes colours appear lighter and shows the texture differently from artificial light in a showroom. With screen fabric, the view from inside to outside is also important. With insect-screen mesh, pay attention to transparency, strength and the distance at which the mesh remains visible.
Also ask how a large product is divided. A small sample says nothing about seams, box size, uprights or the ratio between width and projection. A technical drawing or clear confirmation of the dimensions prevents surprises after production.
Practical checklist for your appointment
- Take photos from inside and outside.
- Note the approximate width, height and preferred operation.
- Indicate when sun, wind or insects cause the most inconvenience.
- Mention existing roller shutters, sun shading and power points.
- Discuss access, floor level and permission from the comunidad.
Advice and installation on the Costa Blanca
Port of Altea combines product advice with professional measuring and installation. Visit our page about custom insect screens, discover the complete range of external sun shading and insect screens or make an appointment at our showroom in La Nucía.