Sharp hook blades for professional cutting work
These hook-shaped replacement blades are suitable for controlled cutting of carpet, PVC, vinyl, and similar floor coverings. The hook-shaped cutting edge pulls through the material, allowing floor coverings to be accurately cut and trimmed to size.
The blades are made of strong carbon steel and supplied in a practical dispenser containing ten pieces. They are available in a small and large version.
Available in two versions
Small hook blade
According to the product information, the small hook blade is intended for low-pile carpet. Its compact hook makes this variant suitable for precise cutting work in thinner floor coverings.
In practice, the small hook blade can also be used for cutting and trimming suitable PVC and vinyl.
- Application: low-pile carpet, PVC, and vinyl
- Material: Carbon steel
- Length: 51.0 mm
- Height: 18.9 mm
- Thickness: 0.63 mm
- Packaging: 10 pieces in a dispenser
Large hook blade
According to the product information, the large hook blade was developed for high-pile carpet. The larger hook provides more space for thicker floor coverings, higher carpet piles, and coarser materials.
Depending on the thickness and composition, this variant can also be used for PVC, vinyl, and other suitable floor coverings.
- Application: high-pile and thicker carpet, PVC, and vinyl
- Material: Carbon steel
- Length: 54.8 mm
- Height: 18.9 mm
- Thickness: 0.63 mm
- Packaging: 10 pieces in a dispenser
Key features
- Hook-shaped replacement blades
- Made of strong carbon steel
- Suitable for professional cutting work
- For carpet, PVC, and vinyl
- Small hook blade for low-pile carpet
- Large hook blade for high-pile and thicker carpet
- Suitable for cutting and trimming to size
- Packaged in sets of ten
- Supplied in a practical dispenser
- Easy to store and take with you
Which variant do you need?
| Variant | Recommended application |
|---|---|
| Small | Low-pile carpet, thinner PVC, and vinyl |
| Large | High-pile or thicker carpet and heavier floor coverings |
Which variant works best for PVC or vinyl depends on the thickness, stiffness, and composition of the material. If in doubt, test it on a scrap piece first.
Use
- Place the hook blade in a suitable blade holder.
- Check that the blade is fully and securely attached.
- Place the floor covering flat and stable.
- Mark the desired cutting line if necessary.
- Pull the blade through the material in a controlled manner.
- Use several controlled cutting motions for thicker materials.
- Replace the blade as soon as it becomes blunt or damaged.
A sharp blade requires less force and generally produces a cleaner cut. A blunt blade is mainly an efficient way to wreck both your material and your mood at the same time.
Work safely
- Use the blades only in a suitable blade holder.
- Before use, check that the blade is securely fastened.
- Always cut away from your body and free hand.
- Preferably wear cut-resistant work gloves.
- Do not use damaged, bent, or blunt blades.
- Store unused blades in the dispenser.
- Collect used blades in a safe blade container.
- Keep the blades out of reach of children.
Packaging and sales unit
The hook blades are sold by the full box. Each box contains ten dispensers, each with ten blades.
- 10 blades per dispenser
- 10 dispensers per box
- 100 hook blades per box
- Sold only by the full box
Technical specifications
| Feature | Small hook blade | Large hook blade |
|---|---|---|
| Shape | Hook-shaped | Hook-shaped |
| Material | C-steel | C-steel |
| Length | 51.0 mm | 54.8 mm |
| Height | 18.9 mm | 18.9 mm |
| Thickness | 0.63 mm | 0.63 mm |
| Dispenser contents | 10 blades | 10 blades |
| Dispensers per box | 10 | 10 |
| Total per box | 100 blades | 100 blades |
| Sales unit | 1 box | 1 box |