The WOLFF Vario-Stripper Silent is a professional, self-propelled floor stripper for removing glued PVC, vinyl, linoleum, rubber, and textile floor coverings.

The machine was specially developed for renovation and maintenance work in noise-sensitive environments. With a sound pressure level of 70 dB(A), it operates considerably more quietly than traditional floor strippers. This allows the machine to be used under suitable conditions while a shop, office, or healthcare facility remains in operation.

The combination of a powerful 1,650 W drive, a working width of 250 mm, and continuously adjustable travel speed makes the machine suitable for medium-sized and larger surfaces.

Key features

• Professional self-propelled floor stripper
• For PVC, vinyl, linoleum, rubber, and carpet
• Exceptionally quiet operation
• Sound pressure level of 70 dB(A)
• Suitable for noise-sensitive work environments
• Continuously adjustable speed of 2.5–16 m/min
• Working capacity of approximately 30–70 m² per hour
• Working width of 250 mm
• Powerful 1,650 W motor
• Continuously adjustable blade angle
• Pull-Back System for safe retraction
• Wheel drive for reduced physical strain
• Controls on top of the handle
• Removable weights
• Removable handle
• USB connection in the switch housing
• Various blades included as standard
• Professional 230 V version

Suitable floor coverings

The Vario-Stripper Silent is suitable for removing:

• Glued PVC flooring
• Vinyl flooring
• Dryback LVT and PVC design flooring
• Linoleum
• Rubber flooring
• Carpet
• Textile floor coverings
• Floor coverings with various backing constructions
• Glued resilient floor coverings

The right blade and blade angle depend on the floor covering, substrate, and adhesive used.

Low-noise operation

The quiet motor makes the machine suitable for use in environments where noise pollution must be minimized as much as possible, such as:

• Hospitals
• Healthcare facilities
• Offices
• Shops
• Hotels
• Schools
• Public buildings
• Commercial premises that remain partially open during the work

The measured sound levels are:

• Sound pressure level: 70 dB(A)
• Sound power level: 83 dB(A)

Depending on the working environment and local occupational safety regulations, hearing protection may still be necessary.

Vario drive system

With the Vario drive system, the travel speed can be continuously adjusted between 2.5 and 16 meters per minute.

A lower speed provides greater control and stripping power for stubbornly bonded or tough floor coverings. A higher speed enables efficient removal of floor coverings that come loose more easily.

The self-propulsion reduces the physical strain on the operator and makes the machine easier to maneuver.

Adjustable blade angle

The blade angle can be adjusted continuously to suit:

• The type of floor covering
• The thickness of the material
• The adhesive used
• The hardness of the substrate
• The conditions at the work site

A correct blade angle improves stripping performance and reduces the risk of damaging the substrate.

Pull-Back-System

The integrated Pull-Back-System makes it possible to pull the floor stripper back in a controlled manner and reposition it without lifting the entire machine.

This system is particularly practical:

• Along walls
• In corners
• At the end of a work lane
• When repositioning the machine
• In rooms with limited maneuvering space

Capacity

Average working capacity is approximately 30–70 m² per hour.

Actual capacity depends on:

• The type of floor covering
• The adhesive used
• The age of the adhesive
• The condition of the substrate
• The selected blade
• The set blade angle
• Travel speed
• The operator's experience

The capacity is therefore an indication, not a guarantee for every project.

Transport and storage

The complete machine weighs approximately 107 kg. To make transport and storage easier, the additional weights and the handle can be removed.

Weight configuration:

• Base machine: approx. 60 kg
• Removable additional weight: approx. 30 kg
• Removable handle: approx. 17 kg
• Total weight: approx. 107 kg

By transporting the machine in separate parts, no one person suddenly has to lift 107 kg of professional optimism out of the van. Still, use suitable lifting and transport equipment.

Standard equipment

• WOLFF Vario-Stripper Silent
• Blade 250 × 60 × 0.7 mm
• Blade 250 × 60 × 1.0 mm
• Blade 250 × 60 × 1.5 mm
• U-blade with cutting edge facing up
• U-blade with cutting edge facing down
• Tool set
• Protective gloves
• Blade protective cover

International WOLFF product pages also list an extension cable. The Dutch page does not explicitly mention it as part of the standard delivery. Therefore, check with the supplier whether the extension cable is included with your version before promising it in the webshop.

Available as an option

• WOLFF Vario Blade Case
• Spare blades in various thicknesses
• U-blades for specific applications
• Replacement blade protection
• Maintenance and service parts

The blade case is not included as standard.

Safe use

• Wear safety gloves when installing and replacing blades.
• Always fit the blade protective cover before transporting the machine.
• Unplug the machine before replacing a blade.
• Check the floor beforehand for cables, pipes, and fasteners.
• Use the blade suitable for the floor covering and substrate.
• Operate the machine only in accordance with the WOLFF manual.
• Use suitable transport equipment when moving the machine.
• Have maintenance and repairs carried out by an authorized service provider.

Technical data

Why choose the WOLFF Vario-Stripper Silent?

The WOLFF Vario-Stripper Silent combines high stripping capacity with relatively low noise emissions and a comfortable operating concept.

Thanks to its self-propulsion, variable speed, adjustable blade angle, and Pull-Back System, the machine can be precisely adapted to different floor coverings and working conditions. The removable weights and handle also make transport and storage much more practical.