{"product_id":"uzin-nc-182-vochtbestendige-reparatie-en-uitvlakmortel-20-kg","title":"UZIN NC 182 Moisture-Resistant Repair and Leveling Mortar – 20 kg","description":"\u003cp class=\"PDq2pG_selectionAnchorContainer\"\u003e\u003cstrong\u003eUZIN NC 182\u003c\/strong\u003e is a moisture-resistant, stable cement-based repair and levelling mortar. The product is suitable for filling and repairing holes, breaks, grooves, and other damage before the floor is levelled or covered with flooring.\u003cspan class=\"PDq2pG_selectionAnchor\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe mortar can be applied at any desired layer thickness and, thanks to its very fine structure, can be finished smoothly down to virtually \u003cstrong\u003ezero millimetres\u003c\/strong\u003e. Due to its rapid curing, UZIN NC 182 is ready for foot traffic after approximately \u003cstrong\u003e40 to 50 minutes\u003c\/strong\u003e and ready for further flooring work after approximately \u003cstrong\u003e60 minutes\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eDuring application, mixed material can be stirred again. This reactivates the mortar and keeps it workable for longer without adding extra water.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eKey properties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eMoisture-resistant cement-based repair mortar\u003c\/li\u003e\n\u003cli\u003eResistant to alkaline moisture\u003c\/li\u003e\n\u003cli\u003eStable and easy to shape\u003c\/li\u003e\n\u003cli\u003eCan be reactivated by remixing\u003c\/li\u003e\n\u003cli\u003eWorking time of approximately 15 to 20 minutes\u003c\/li\u003e\n\u003cli\u003eReady for foot traffic after approximately 40 to 50 minutes\u003c\/li\u003e\n\u003cli\u003eReady for flooring installation after approximately 60 minutes\u003c\/li\u003e\n\u003cli\u003eSuitable for any layer thickness\u003c\/li\u003e\n\u003cli\u003eVery fine surface texture\u003c\/li\u003e\n\u003cli\u003eCan be finished down to virtually zero\u003c\/li\u003e\n\u003cli\u003eSuitable for thin repairs and deep holes\u003c\/li\u003e\n\u003cli\u003eSuitable for underfloor heating\u003c\/li\u003e\n\u003cli\u003eFor indoor use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe stated times apply at approximately 20 °C and a relative humidity of 65%. Temperature, humidity, and layer thickness may affect curing.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eSuitable substrates and applications\u003c\/h3\u003e\n\u003cp\u003eUZIN NC 182 can be applied, with the appropriate preparation and primer, to, among others:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCement screeds\u003c\/li\u003e\n\u003cli\u003eConcrete\u003c\/li\u003e\n\u003cli\u003eOld substrates with well-adhering water-resistant adhesive residues\u003c\/li\u003e\n\u003cli\u003eScrewed particleboards of classes P3, P5, and P7\u003c\/li\u003e\n\u003cli\u003eScrewed OSB boards of classes OSB 2 to OSB 4\u003c\/li\u003e\n\u003cli\u003eCeramic tile floors\u003c\/li\u003e\n\u003cli\u003eNatural stone floors\u003c\/li\u003e\n\u003cli\u003eTerrazzo floors\u003c\/li\u003e\n\u003cli\u003eExisting and new mastic asphalt floors\u003c\/li\u003e\n\u003cli\u003eMagnesite and wood magnesite\u003c\/li\u003e\n\u003cli\u003eCement fibreboards\u003c\/li\u003e\n\u003cli\u003eGypsum fibreboards\u003c\/li\u003e\n\u003cli\u003eSubstrates with underfloor heating\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe product is suitable, among other things, for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFilling holes and grooves\u003c\/li\u003e\n\u003cli\u003eRepairing broken or damaged flooring\u003c\/li\u003e\n\u003cli\u003eLevelling local differences in height\u003c\/li\u003e\n\u003cli\u003ePatching floor surfaces\u003c\/li\u003e\n\u003cli\u003eCreating smooth transitions down to virtually zero\u003c\/li\u003e\n\u003cli\u003eRepairing steps and landings\u003c\/li\u003e\n\u003cli\u003ePreliminary repairs before levelling or bonding\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFrom a layer thickness of 1 mm, the repair layer is suitable for loads from castors in accordance with DIN EN 12529.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eSubstrate preparation\u003c\/h3\u003e\n\u003cp\u003eThe substrate must be load-bearing, dimensionally stable, permanently dry, clean, and free of cracks. Dust, dirt, grease, loose particles, and other substances that could impair adhesion must be completely removed.\u003c\/p\u003e\n\u003cp\u003eWeak or poorly bonded layers must be sanded, milled, or removed by another suitable method. Then vacuum the substrate thoroughly and, if necessary, treat it with a suitable primer.\u003c\/p\u003e\n\u003cp\u003eBefore application, always consult the current product data sheet and UZIN's application instructions.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eMixing and application\u003c\/h3\u003e\n\u003cp\u003eDepending on the desired consistency, use \u003cstrong\u003e4.6 to 5.4 liters of clean, cold water per 20 kg bag\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eFirst pour the water into a clean mixing tub. Then gradually add the powder and mechanically mix the material with a suitable basket mixer until a homogeneous, lump-free mixture is obtained.\u003c\/p\u003e\n\u003cp\u003eApply the mortar directly to the substrate and spread it with a smoothing trowel. If possible, apply the desired layer thickness in a single operation.\u003c\/p\u003e\n\u003cp\u003eMaterial that becomes stiffer during application can be stirred again. Do not add any extra water. Remixing makes the mortar easier to work with again.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eThicker layers\u003c\/h3\u003e\n\u003cp\u003eFor layer thicknesses greater than 10 mm, UZIN NC 182 can be filled with up to \u003cstrong\u003e50% quartz sand with a grain size of 0.3 to 0.8 mm\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eFor deep repairs, large areas, and unusual substrates, always check the current technical product data sheet or ask UZIN for project-specific advice.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eCoverage\u003c\/h3\u003e\n\u003cp\u003eAverage coverage is approximately \u003cstrong\u003e1.5 kg per m² per millimeter of layer thickness\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cdiv class=\"group TyagGW_tableContainer\"\u003e\n\u003cdiv class=\"TyagGW_tableWrapper flex flex-col-reverse w-fit\" tabindex=\"-1\"\u003e\n\u003ctable class=\"w-fit min-w-(--thread-content-width)\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth class=\"last:pe-10\"\u003eLayer thickness\u003c\/th\u003e\n\u003cth class=\"last:pe-10\"\u003eCoverage\u003c\/th\u003e\n\u003cth class=\"last:pe-10\"\u003eArea per 20 kg bag\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 mm\u003c\/td\u003e\n\u003ctd\u003eapproximately 1.5 kg\/m²\u003c\/td\u003e\n\u003ctd\u003eapproximately 13.3 m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3 mm\u003c\/td\u003e\n\u003ctd\u003eapproximately 4.5 kg\/m²\u003c\/td\u003e\n\u003ctd\u003eapproximately 4.4 m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e10 mm\u003c\/td\u003e\n\u003ctd\u003eapproximately 15 kg\/m²\u003c\/td\u003e\n\u003ctd\u003eapproximately 1.3 m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eActual coverage depends on the repair depth, surface texture, and selected consistency.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eProduct type:\u003c\/strong\u003e non-slump repair and smoothing mortar\u003cbr\u003e\u003cstrong\u003eBinder:\u003c\/strong\u003e cement-based\u003cbr\u003e\u003cstrong\u003ePackaging:\u003c\/strong\u003e 20 kg paper bag\u003cbr\u003e\u003cstrong\u003eColor:\u003c\/strong\u003e gray\u003cbr\u003e\u003cstrong\u003eLayer thickness:\u003c\/strong\u003e any layer thickness, can be feathered down to virtually zero\u003cbr\u003e\u003cstrong\u003eWater quantity:\u003c\/strong\u003e 4.6 to 5.4 liters per bag\u003cbr\u003e\u003cstrong\u003eCoverage:\u003c\/strong\u003e approximately 1.5 kg\/m² per mm layer thickness\u003cbr\u003e\u003cstrong\u003eWorking time:\u003c\/strong\u003e approximately 15 to 20 minutes\u003cbr\u003e\u003cstrong\u003eWalkable:\u003c\/strong\u003e after approximately 40 to 50 minutes\u003cbr\u003e\u003cstrong\u003eReady for covering:\u003c\/strong\u003e after approximately 60 minutes\u003cbr\u003e\u003cstrong\u003eIdeal application temperature:\u003c\/strong\u003e 15 to 25 °C\u003cbr\u003e\u003cstrong\u003eMinimum floor temperature:\u003c\/strong\u003e 10 °C\u003cbr\u003e\u003cstrong\u003eFire classification:\u003c\/strong\u003e A1fl\u003cbr\u003e\u003cstrong\u003eShelf life:\u003c\/strong\u003e at least 12 months\u003cbr\u003e\u003cstrong\u003eQuantity per pallet:\u003c\/strong\u003e 54 bags\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eWhy choose UZIN NC 182?\u003c\/h3\u003e\n\u003cp\u003eUZIN NC 182 is suitable for fast, professional repairs where moisture resistance and a short drying time are important. The mortar can be used both for deep repairs and for feathered transitions.\u003c\/p\u003e\n\u003cp\u003eThe reactivatable formulation, fine structure, and rapid curing make the product suitable for renovations where the floor must be leveled or bonded within a short time.\u003c\/p\u003e","brand":"Uzin","offers":[{"title":"Default Title","offer_id":63283852181834,"sku":null,"price":69.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0969\/2194\/4394\/files\/uzinnc182.png?v=1787602545","url":"https:\/\/portofaltea.es\/pl\/products\/uzin-nc-182-vochtbestendige-reparatie-en-uitvlakmortel-20-kg","provider":"Port of Altea","version":"1.0","type":"link"}