{"product_id":"uzin-nc-587-fusiontec-sneldrogende-dunne-dekvloer-20-kg","title":"UZIN NC 587 FusionTec Fast-Drying Thin Screed – 20 kg","description":"\u003cp class=\"PDq2pG_selectionAnchorContainer\"\u003eThe \u003cstrong\u003eUZIN NC 587 FusionTec\u003c\/strong\u003e is a self-levelling, virtually shrinkage-free and extremely fast-drying thin screed for layer thicknesses of \u003cstrong\u003e3 to 50 mm\u003c\/strong\u003e. The product was developed to quickly create level, bonded substrates in residential and commercial projects.\u003cspan class=\"PDq2pG_selectionAnchor\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eEven with thicker layers and less favourable climatic conditions, the floor is quickly ready for further finishing. Layer thicknesses of up to 50 mm are ready for installation after approximately \u003cstrong\u003e48 hours\u003c\/strong\u003e under normal conditions.\u003c\/p\u003e\n\u003cp\u003eThanks to its good flow properties and pumpability, UZIN NC 587 is particularly suitable for large surfaces. The product can also be used for embedding suitable hot-water and electric underfloor heating systems.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eKey properties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSelf-levelling FusionTec thin screed\u003c\/li\u003e\n\u003cli\u003eSuitable for layer thicknesses from 3 to 50 mm\u003c\/li\u003e\n\u003cli\u003eExtremely fast-drying\u003c\/li\u003e\n\u003cli\u003eUp to 50 mm, ready for installation after approximately 48 hours\u003c\/li\u003e\n\u003cli\u003eReliable drying under less favourable conditions\u003c\/li\u003e\n\u003cli\u003eCures with virtually no shrinkage\u003c\/li\u003e\n\u003cli\u003eSuitable for large surfaces\u003c\/li\u003e\n\u003cli\u003eSuitable for manual application and pumping\u003c\/li\u003e\n\u003cli\u003eSuitable for embedding underfloor heating\u003c\/li\u003e\n\u003cli\u003eWorking time of approximately 40 minutes\u003c\/li\u003e\n\u003cli\u003eWalkable after approximately 2 to 3 hours\u003c\/li\u003e\n\u003cli\u003eSuitable for floor coverings, parquet, tiles and natural stone\u003c\/li\u003e\n\u003cli\u003eFor indoor use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe stated times apply at approximately 20 °C and a relative humidity of 65%. Different conditions may affect application and drying.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eApplications\u003c\/h3\u003e\n\u003cp\u003eUZIN NC 587 FusionTec can be used for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCreating bonded thin screeds\u003c\/li\u003e\n\u003cli\u003eLevelling height differences from 3 to 50 mm\u003c\/li\u003e\n\u003cli\u003eCreating floor surfaces ready for installation quickly\u003c\/li\u003e\n\u003cli\u003eEmbedding hot-water underfloor heating systems\u003c\/li\u003e\n\u003cli\u003eEmbedding suitable electric underfloor heating systems\u003c\/li\u003e\n\u003cli\u003eLarge surfaces that are pumped mechanically\u003c\/li\u003e\n\u003cli\u003eRenovation and new-build projects\u003c\/li\u003e\n\u003cli\u003eCommercial projects with tight deadlines\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUZIN NC 587 is intended for bonded applications. For a non-bonded or floating floor construction, an approved product system must be used.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eSuitable for floor coverings\u003c\/h3\u003e\n\u003cp\u003eUZIN NC 587 can be used as a substrate for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePVC and LVT\u003c\/li\u003e\n\u003cli\u003eVinyl\u003c\/li\u003e\n\u003cli\u003eLinoleum\u003c\/li\u003e\n\u003cli\u003eRubber\u003c\/li\u003e\n\u003cli\u003eCarpet and other textile floor coverings\u003c\/li\u003e\n\u003cli\u003eOther resilient floor coverings\u003c\/li\u003e\n\u003cli\u003eParquet\u003c\/li\u003e\n\u003cli\u003eCeramic tiles\u003c\/li\u003e\n\u003cli\u003eNatural stone\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor textile and resilient floor coverings, additional leveling may be necessary if the coarse texture of a thicker layer is not smooth enough for the final floor finish.\u003c\/p\u003e\n\u003cp\u003eThe floor is suitable for loads from swivel castors in accordance with DIN EN 12529.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eSuitable substrates\u003c\/h3\u003e\n\u003cp\u003eUZIN NC 587 can be used, in combination with the appropriate preparation and primer, on, among others:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCement screeds\u003c\/li\u003e\n\u003cli\u003eCalcium sulfate and anhydrite screeds\u003c\/li\u003e\n\u003cli\u003eConcrete\u003c\/li\u003e\n\u003cli\u003eMagnesite and wood magnesite\u003c\/li\u003e\n\u003cli\u003eSubstrates with well-adhering, water-resistant adhesive residues\u003c\/li\u003e\n\u003cli\u003eOld leveling layers\u003c\/li\u003e\n\u003cli\u003eCeramic tile floors\u003c\/li\u003e\n\u003cli\u003eNatural stone floors\u003c\/li\u003e\n\u003cli\u003eTerrazzo floors\u003c\/li\u003e\n\u003cli\u003eSanded mastic asphalt floors IC 10 and IC 15, up to a maximum layer thickness of 10 mm\u003c\/li\u003e\n\u003cli\u003eSuitable underfloor heating systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eSubstrate preparation\u003c\/h3\u003e\n\u003cp\u003eThe substrate must be load-bearing, stable, permanently dry, clean, and free of cracks. Dirt, oil, grease, dust, and other substances that may reduce adhesion must be completely removed.\u003c\/p\u003e\n\u003cp\u003eCement and calcium sulfate screeds must be inspected, sanded, and carefully vacuumed in accordance with the applicable regulations.\u003c\/p\u003e\n\u003cp\u003eRemove poorly adhering layers, loose adhesive residues, old leveling compounds, coatings, and paint residues by brushing, sanding, milling, or dust-free shot blasting. Then treat the substrate with a suitable UZIN primer and allow it to dry completely.\u003c\/p\u003e\n\u003cp\u003eBefore application, always consult the current technical data sheets for all products used.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eMixing and application\u003c\/h3\u003e\n\u003cp\u003ePour \u003cstrong\u003e3.4 liters of clean, cold water\u003c\/strong\u003e into a clean mixing tub. Then gradually add the entire contents of the 20 kg bag while mixing.\u003c\/p\u003e\n\u003cp\u003eMix the material mechanically with a suitable basket mixer until it forms a fluid, homogeneous, lump-free compound.\u003c\/p\u003e\n\u003cp\u003ePour the compound onto the substrate and spread it evenly with a smoothing trowel, squeegee, or spike squeegee. If necessary, use a spiked roller to remove trapped air and improve the surface.\u003c\/p\u003e\n\u003cp\u003ePreferably apply the desired layer thickness in a single operation. For large surfaces, the product can be pumped mechanically. UZIN Level Pins can be used to check the correct layer thickness.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eConsumption\u003c\/h3\u003e\n\u003cp\u003eAverage consumption is approximately \u003cstrong\u003e1.8 kg per m² per millimetre of layer thickness\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cdiv class=\"group TyagGW_tableContainer\"\u003e\n\u003cdiv class=\"TyagGW_tableWrapper flex flex-col-reverse w-fit\" tabindex=\"-1\"\u003e\n\u003ctable class=\"w-fit min-w-(--thread-content-width)\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth class=\"last:pe-10\"\u003eLayer thickness\u003c\/th\u003e\n\u003cth class=\"last:pe-10\"\u003eConsumption\u003c\/th\u003e\n\u003cth class=\"last:pe-10\"\u003eArea per 20 kg bag\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e3 mm\u003c\/td\u003e\n\u003ctd\u003eapproximately 5.4 kg\/m²\u003c\/td\u003e\n\u003ctd\u003eapproximately 3.7 m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e5 mm\u003c\/td\u003e\n\u003ctd\u003eapproximately 9 kg\/m²\u003c\/td\u003e\n\u003ctd\u003eapproximately 2.2 m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e10 mm\u003c\/td\u003e\n\u003ctd\u003eapproximately 18 kg\/m²\u003c\/td\u003e\n\u003ctd\u003eapproximately 1.1 m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e25 mm\u003c\/td\u003e\n\u003ctd\u003eapproximately 45 kg\/m²\u003c\/td\u003e\n\u003ctd\u003eapproximately 0.44 m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e50 mm\u003c\/td\u003e\n\u003ctd\u003eapproximately 90 kg\/m²\u003c\/td\u003e\n\u003ctd\u003eapproximately 0.22 m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eActual consumption depends on the layer thickness, the flatness of the substrate, and the selected floor build-up.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eDrying time\u003c\/h3\u003e\n\u003cdiv class=\"group TyagGW_tableContainer\"\u003e\n\u003cdiv class=\"TyagGW_tableWrapper flex flex-col-reverse w-fit\" tabindex=\"-1\"\u003e\n\u003ctable class=\"w-fit min-w-(--thread-content-width)\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth class=\"last:pe-10\"\u003eFloor covering\u003c\/th\u003e\n\u003cth class=\"last:pe-10\"\u003eLayer thickness\u003c\/th\u003e\n\u003cth class=\"last:pe-10\"\u003eIndicative readiness for floor covering\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTextile and resilient floor coverings\u003c\/td\u003e\n\u003ctd\u003e3–10 mm\u003c\/td\u003e\n\u003ctd\u003eapproximately 20 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTextile and resilient floor coverings\u003c\/td\u003e\n\u003ctd\u003e10–50 mm\u003c\/td\u003e\n\u003ctd\u003eapproximately 48 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eParquet\u003c\/td\u003e\n\u003ctd\u003eup to 50 mm\u003c\/td\u003e\n\u003ctd\u003eapproximately 48 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCeramic tiles and natural stone\u003c\/td\u003e\n\u003ctd\u003eup to 50 mm\u003c\/td\u003e\n\u003ctd\u003eapproximately 48 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eAlways check that the screed is sufficiently dry before bonding. Additional moisture measurements or system-specific advice may be required for sensitive floor coverings.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eProduct type:\u003c\/strong\u003e fast-drying self-levelling thin screed\u003cbr\u003e\u003cstrong\u003eBinder:\u003c\/strong\u003e FusionTec with special cements\u003cbr\u003e\u003cstrong\u003ePackaging:\u003c\/strong\u003e 20 kg paper bag\u003cbr\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e beige\/light grey\u003cbr\u003e\u003cstrong\u003eLayer thickness:\u003c\/strong\u003e 3 to 50 mm\u003cbr\u003e\u003cstrong\u003eWater quantity:\u003c\/strong\u003e 3.4 litres per bag\u003cbr\u003e\u003cstrong\u003eConsumption:\u003c\/strong\u003e approximately 1.8 kg\/m² per mm of layer thickness\u003cbr\u003e\u003cstrong\u003eWorking time:\u003c\/strong\u003e approximately 40 minutes\u003cbr\u003e\u003cstrong\u003eWalkable:\u003c\/strong\u003e after approximately 2 to 3 hours\u003cbr\u003e\u003cstrong\u003eReady for floor covering:\u003c\/strong\u003e after approximately 48 hours at the latest, depending on the application\u003cbr\u003e\u003cstrong\u003eMinimum floor temperature:\u003c\/strong\u003e 10 °C\u003cbr\u003e\u003cstrong\u003eFlow spread:\u003c\/strong\u003e approximately 140 mm, plus or minus 5 mm\u003cbr\u003e\u003cstrong\u003eThermal conductivity:\u003c\/strong\u003e 1.4 W\/mK\u003cbr\u003e\u003cstrong\u003eFire class:\u003c\/strong\u003e A1fl\u003cbr\u003e\u003cstrong\u003eShelf life:\u003c\/strong\u003e at least 9 months\u003cbr\u003e\u003cstrong\u003eQuantity per pallet:\u003c\/strong\u003e 54 bags\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eWhy choose UZIN NC 587 FusionTec?\u003c\/h3\u003e\n\u003cp\u003eUZIN NC 587 is suitable for projects where greater layer thicknesses need to be built up and finished quickly. Unlike traditional thick levelling and screed systems, this thin screed can be ready for floor covering after approximately 48 hours at a layer thickness of up to 50 mm.\u003c\/p\u003e\n\u003cp\u003eThe combination of rapid drying, virtually tension-free curing, and machine pumpability makes the product suitable for large-scale renovations, commercial projects, and floors with integrated heating.\u003c\/p\u003e","brand":"Uzin","offers":[{"title":"Default Title","offer_id":63296554926410,"sku":null,"price":54.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0969\/2194\/4394\/files\/uzinnc587.jpg?v=1787635207","url":"https:\/\/portofaltea.es\/fr\/products\/uzin-nc-587-fusiontec-sneldrogende-dunne-dekvloer-20-kg","provider":"Port of Altea","version":"1.0","type":"link"}