{"product_id":"uzin-nc-172-biturbo-sneldrogende-egaline-20-kg","title":"UZIN NC 172 BiTurbo Fast-Drying Self-Leveling Compound – 20 kg","description":"\u003cp class=\"PDq2pG_selectionAnchorContainer\"\u003e\u003cstrong\u003eUZIN NC 172 BiTurbo\u003c\/strong\u003e is an extremely fast-drying, self-levelling cement-based compound for projects where the floor needs to be finished within a very short time. The product forms a flat, smooth, and highly absorbent surface for bonding virtually all floor coverings.\u003cspan class=\"PDq2pG_selectionAnchor\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThanks to the \u003cstrong\u003eLevel Plus Effect\u003c\/strong\u003e, the levelling compound flows out exceptionally well, creating a very even surface. This generally reduces the need for subsequent finishing and can reduce adhesive consumption by up to 10% during subsequent floor finishing.\u003c\/p\u003e\n\u003cp\u003eThe levelling compound is \u003cstrong\u003eready for foot traffic after approximately 60 minutes\u003c\/strong\u003e. Most textile and resilient floor coverings can already be installed from that point onward. UZIN NC 172 BiTurbo can be pumped and is suitable exclusively for indoor use.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eKey properties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eExtremely fast-drying cement-based levelling compound\u003c\/li\u003e\n\u003cli\u003eSelf-levelling with Level Plus Effect\u003c\/li\u003e\n\u003cli\u003eSuitable for layer thicknesses of up to 10 mm\u003c\/li\u003e\n\u003cli\u003eReady for foot traffic after approximately 60 minutes\u003c\/li\u003e\n\u003cli\u003eMost floor coverings ready for installation after approximately 60 minutes\u003c\/li\u003e\n\u003cli\u003eParquet, cork, and special floor coverings ready for installation after approximately 12 hours\u003c\/li\u003e\n\u003cli\u003eVery smooth and absorbent surface\u003c\/li\u003e\n\u003cli\u003eUp to 10% lower adhesive consumption\u003c\/li\u003e\n\u003cli\u003eHydraulically setting\u003c\/li\u003e\n\u003cli\u003eVery high compressive and flexural tensile strength\u003c\/li\u003e\n\u003cli\u003eSuitable for heavy loads\u003c\/li\u003e\n\u003cli\u003eSuitable for manual application and pumping\u003c\/li\u003e\n\u003cli\u003eLow in chromate\u003c\/li\u003e\n\u003cli\u003eFor indoor use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe specified times apply at approximately 20 °C, a relative humidity of 65%, and a floor temperature of approximately 18 °C. Deviating conditions and greater layer thicknesses may affect the drying time.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eSuitable for floor coverings\u003c\/h3\u003e\n\u003cp\u003eUZIN NC 172 BiTurbo is suitable as a substrate for, among others:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCarpet and other textile floor coverings\u003c\/li\u003e\n\u003cli\u003ePVC and CV floor coverings\u003c\/li\u003e\n\u003cli\u003ePVC design flooring and LVT\u003c\/li\u003e\n\u003cli\u003eLinoleum\u003c\/li\u003e\n\u003cli\u003eRubber in rolls and tiles\u003c\/li\u003e\n\u003cli\u003eCeramic tiles\u003c\/li\u003e\n\u003cli\u003eNatural stone\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAfter a drying time of approximately 12 hours, the levelling compound is also suitable as a substrate for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eParquet\u003c\/li\u003e\n\u003cli\u003eCork\u003c\/li\u003e\n\u003cli\u003ePO floor coverings\u003c\/li\u003e\n\u003cli\u003ePUR floor coverings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eUse a suitable adhesive for each floor covering and follow UZIN's current application instructions.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eSuitable substrates\u003c\/h3\u003e\n\u003cp\u003eWithout primer, UZIN NC 172 BiTurbo can be applied under certain conditions to:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOld substrates with well-adhering, water-resistant adhesive residues\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWith a suitable primer, the product can be applied to:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCement screeds\u003c\/li\u003e\n\u003cli\u003eConcrete\u003c\/li\u003e\n\u003cli\u003eCalcium sulfate and anhydrite screeds, only after technical advice\u003c\/li\u003e\n\u003cli\u003eExisting terrazzo floors\u003c\/li\u003e\n\u003cli\u003eCeramic tile floors\u003c\/li\u003e\n\u003cli\u003eNatural stone floors\u003c\/li\u003e\n\u003cli\u003eSubstrates with underfloor heating\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFor layer thicknesses exceeding 3 mm, a suitable primer must always be applied.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eLoad-bearing capacity\u003c\/h3\u003e\n\u003cp\u003eUZIN NC 172 BiTurbo is suitable for heavily trafficked areas in commercial and industrial environments.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCompressive strength class up to C50\u003c\/li\u003e\n\u003cli\u003eSuitable for loads from swivel castors from a layer thickness of 1 mm\u003c\/li\u003e\n\u003cli\u003eSuitable for heavy traffic and transport equipment in combination with a suitable floor covering\u003c\/li\u003e\n\u003cli\u003eFor forklift traffic, maintain a minimum layer thickness of 3 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003chr\u003e\n\u003ch3\u003eSubstrate preparation\u003c\/h3\u003e\n\u003cp\u003eThe substrate must be load-bearing, dimensionally stable, permanently dry, clean and free of cracks. Dust, dirt, grease, loose particles and other substances that may reduce adhesion must be completely removed.\u003c\/p\u003e\n\u003cp\u003eWeak or poorly adhering layers must be removed by brushing, sanding, milling or dust-free shot blasting. Then vacuum the substrate thoroughly.\u003c\/p\u003e\n\u003cp\u003eDepending on the type and condition of the substrate, choose a suitable UZIN primer. Apply the levelling compound only once the primer has dried completely.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eMixing and application\u003c\/h3\u003e\n\u003cp\u003ePour approximately \u003cstrong\u003e5 litres of clean, cold water\u003c\/strong\u003e into a clean mixing tub. Then gradually add the entire contents of the 20 kg bag while mixing.\u003c\/p\u003e\n\u003cp\u003eMechanically mix the material with a suitable paddle mixer until a smooth, homogeneous, lump-free mixture is obtained. The maximum processing time is approximately \u003cstrong\u003e15 minutes\u003c\/strong\u003e. Therefore, do not mix more material than can be processed within this time.\u003c\/p\u003e\n\u003cp\u003ePour the levelling compound directly onto the substrate and spread it evenly with a smoothing trowel or levelling rake. For thicker layers, use a spiked roller to remove air bubbles and achieve an even surface.\u003c\/p\u003e\n\u003cp\u003ePreferably apply the desired layer thickness in a single operation. Small irregularities can be removed with a filling knife after drying. The levelling layer is generally easy to sand after approximately 2.5 to 4 hours.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eConsumption\u003c\/h3\u003e\n\u003cp\u003eAverage consumption is approximately \u003cstrong\u003e1.5 kg per m² per millimetre of layer thickness\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cdiv class=\"group TyagGW_tableContainer\"\u003e\n\u003cdiv class=\"TyagGW_tableWrapper flex flex-col-reverse w-fit\" tabindex=\"-1\"\u003e\n\u003ctable class=\"w-fit min-w-(--thread-content-width)\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth class=\"last:pe-10\"\u003eLayer thickness\u003c\/th\u003e\n\u003cth class=\"last:pe-10\"\u003eConsumption\u003c\/th\u003e\n\u003cth class=\"last:pe-10\"\u003eArea per 20 kg bag\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 mm\u003c\/td\u003e\n\u003ctd\u003eapproximately 1.5 kg\/m²\u003c\/td\u003e\n\u003ctd\u003eapproximately 13.3 m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3 mm\u003c\/td\u003e\n\u003ctd\u003eapproximately 4.5 kg\/m²\u003c\/td\u003e\n\u003ctd\u003eapproximately 4.4 m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e10 mm\u003c\/td\u003e\n\u003ctd\u003eapproximately 15 kg\/m²\u003c\/td\u003e\n\u003ctd\u003eapproximately 1.3 m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eActual consumption depends on the evenness, structure, and absorbency of the substrate.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eProduct type:\u003c\/strong\u003e extremely fast-drying self-levelling compound\u003cbr\u003e\u003cstrong\u003eBinder:\u003c\/strong\u003e cement-based and hydraulically setting\u003cbr\u003e\u003cstrong\u003ePackaging:\u003c\/strong\u003e 20 kg paper bag\u003cbr\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e dark grey\u003cbr\u003e\u003cstrong\u003eLayer thickness:\u003c\/strong\u003e up to 10 mm\u003cbr\u003e\u003cstrong\u003eWater quantity:\u003c\/strong\u003e approximately 5 litres per bag\u003cbr\u003e\u003cstrong\u003eCoverage:\u003c\/strong\u003e approximately 1.5 kg\/m² per mm of layer thickness\u003cbr\u003e\u003cstrong\u003eWorking time:\u003c\/strong\u003e maximum 15 minutes\u003cbr\u003e\u003cstrong\u003eWalkable:\u003c\/strong\u003e after approximately 60 minutes\u003cbr\u003e\u003cstrong\u003eReady for most floor coverings:\u003c\/strong\u003e after approximately 60 minutes\u003cbr\u003e\u003cstrong\u003eReady for parquet, cork, PO and PUR:\u003c\/strong\u003e after approximately 12 hours\u003cbr\u003e\u003cstrong\u003eIdeal floor temperature:\u003c\/strong\u003e approximately 20 °C\u003cbr\u003e\u003cstrong\u003eMinimum floor temperature:\u003c\/strong\u003e 10 °C\u003cbr\u003e\u003cstrong\u003eFire classification:\u003c\/strong\u003e A2fl-s1\u003cbr\u003e\u003cstrong\u003eShelf life:\u003c\/strong\u003e at least 6 months\u003cbr\u003e\u003cstrong\u003eQuantity per pallet:\u003c\/strong\u003e 54 bags\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eWhy choose UZIN NC 172 BiTurbo?\u003c\/h3\u003e\n\u003cp\u003eUZIN NC 172 BiTurbo was developed for renovations and commercial projects where downtime must be kept to a minimum. In many situations, the floor can be levelled and finished within a single working day.\u003c\/p\u003e\n\u003cp\u003eThe fast drying, high load-bearing capacity, and smooth surface structure make the product suitable for homes, shops, offices, healthcare facilities, and heavily trafficked commercial areas.\u003c\/p\u003e","brand":"Uzin","offers":[{"title":"Default Title","offer_id":63283857523018,"sku":null,"price":92.5,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0969\/2194\/4394\/files\/uzinnc172.jpg?v=1787602794","url":"https:\/\/portofaltea.es\/fr\/products\/uzin-nc-172-biturbo-sneldrogende-egaline-20-kg","provider":"Port of Altea","version":"1.0","type":"link"}