{"product_id":"uzin-nc-150-projectegalisatie-20-kg","title":"UZIN NC 150 Project-Leveling Compound – 20 kg","description":"\u003cp class=\"PDq2pG_selectionAnchorContainer\"\u003e\u003cstrong\u003eUZIN NC 150\u003c\/strong\u003e is a very low-emission, cement-based project smoothing compound for leveling substrates and making them ready for covering. The smoothing compound has good flow properties, is highly suitable for pumping, and can be applied in layer thicknesses of up to \u003cstrong\u003e10 mm\u003c\/strong\u003e.\u003cspan class=\"PDq2pG_selectionAnchor\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eAfter drying, it forms a smooth, highly absorbent surface. This provides a suitable base for textile and resilient floor coverings, such as carpet, PVC, vinyl, and linoleum, as well as for multilayer parquet.\u003c\/p\u003e\n\u003cp\u003eUZIN NC 150 was developed for normal loads in residential and commercial projects and is intended exclusively for indoor use.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eKey properties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eCement-based and self-leveling\u003c\/li\u003e\n\u003cli\u003eSuitable for layer thicknesses up to 10 mm\u003c\/li\u003e\n\u003cli\u003eGood flow properties\u003c\/li\u003e\n\u003cli\u003eSuitable for manual application and pumping\u003c\/li\u003e\n\u003cli\u003eVery easy to sand\u003c\/li\u003e\n\u003cli\u003eHighly absorbent surface\u003c\/li\u003e\n\u003cli\u003eWorking time of approximately 20 to 40 minutes\u003c\/li\u003e\n\u003cli\u003eWalkable after approximately 2 to 3 hours\u003c\/li\u003e\n\u003cli\u003eReady for covering after approximately 24 hours\u003c\/li\u003e\n\u003cli\u003eSuitable for hydronic underfloor heating\u003c\/li\u003e\n\u003cli\u003eVery low emissions according to EMICODE EC 1 PLUS\u003c\/li\u003e\n\u003cli\u003eFor indoor use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe stated times apply at approximately 20 °C and a relative humidity of 65%. Temperature, humidity, and layer thickness may affect the drying time.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eSuitable substrates\u003c\/h3\u003e\n\u003cp\u003eUZIN NC 150 can be used, in combination with the correct preparation and primer, on, among others:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCement screeds\u003c\/li\u003e\n\u003cli\u003eConcrete\u003c\/li\u003e\n\u003cli\u003eTerrazzo floors\u003c\/li\u003e\n\u003cli\u003eNew mastic asphalt floors up to a maximum layer thickness of 5 mm\u003c\/li\u003e\n\u003cli\u003eExisting ceramic tile floors\u003c\/li\u003e\n\u003cli\u003eNatural stone floors\u003c\/li\u003e\n\u003cli\u003eExisting smoothing layers\u003c\/li\u003e\n\u003cli\u003eSubstrates with well-adhering, water-resistant adhesive residues\u003c\/li\u003e\n\u003cli\u003eMagnesite and wood magnesite\u003c\/li\u003e\n\u003cli\u003eSuitable dry construction systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe smoothing compound is suitable as a substrate for, among others:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCarpet\u003c\/li\u003e\n\u003cli\u003ePVC and LVT\u003c\/li\u003e\n\u003cli\u003eVinyl and CV floor coverings\u003c\/li\u003e\n\u003cli\u003eLinoleum\u003c\/li\u003e\n\u003cli\u003eOther textile and resilient floor coverings\u003c\/li\u003e\n\u003cli\u003eMultilayer parquet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFrom a layer thickness of 1 mm, the smoothing compound is suitable for hydronic underfloor heating and loads from swivel castors in accordance with DIN EN 12529.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eSubstrate preparation\u003c\/h3\u003e\n\u003cp\u003eThe substrate must be load-bearing, dimensionally stable, permanently dry, clean, and free of cracks. Dust, dirt, grease, loose particles, and other substances that may reduce adhesion must be completely removed.\u003c\/p\u003e\n\u003cp\u003eWeak or poorly bonded layers must be sanded, milled, or removed by another suitable method. Then vacuum the substrate thoroughly and treat it with a suitable primer.\u003c\/p\u003e\n\u003cp\u003eAlways consult the current product sheet and UZIN's application instructions before use.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eMixing and application\u003c\/h3\u003e\n\u003cp\u003ePour approximately \u003cstrong\u003e5 litres of clean, cold water\u003c\/strong\u003e into a clean mixing tub. Then gradually add the full contents of the 20 kg bag.\u003c\/p\u003e\n\u003cp\u003eMix the material mechanically with a suitable basket mixer until a smooth, homogeneous, lump-free mixture is obtained. Do not add more water than specified, as a mixture that is too thin can affect the strength and drying.\u003c\/p\u003e\n\u003cp\u003ePour the levelling compound onto the substrate and spread it evenly with a smoothing trowel or levelling rake. Immediately after spreading, use a spiked roller to create an even surface and remove trapped air.\u003c\/p\u003e\n\u003cp\u003ePreferably apply the required layer thickness in a single operation.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eCoverage\u003c\/h3\u003e\n\u003cp\u003eAverage consumption is approximately \u003cstrong\u003e1.5 kg per m² per millimetre of layer thickness\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cdiv class=\"group TyagGW_tableContainer\"\u003e\n\u003cdiv class=\"TyagGW_tableWrapper flex flex-col-reverse w-fit\" tabindex=\"-1\"\u003e\n\u003ctable class=\"w-fit min-w-(--thread-content-width)\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth class=\"last:pe-10\"\u003eLayer thickness\u003c\/th\u003e\n\u003cth class=\"last:pe-10\"\u003eCoverage\u003c\/th\u003e\n\u003cth class=\"last:pe-10\"\u003eArea per 20 kg bag\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 mm\u003c\/td\u003e\n\u003ctd\u003eapproximately 1.5 kg\/m²\u003c\/td\u003e\n\u003ctd\u003eapproximately 13.3 m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3 mm\u003c\/td\u003e\n\u003ctd\u003eapproximately 4.5 kg\/m²\u003c\/td\u003e\n\u003ctd\u003eapproximately 4.4 m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e5 mm\u003c\/td\u003e\n\u003ctd\u003eapproximately 7.5 kg\/m²\u003c\/td\u003e\n\u003ctd\u003eapproximately 2.7 m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e10 mm\u003c\/td\u003e\n\u003ctd\u003eapproximately 15 kg\/m²\u003c\/td\u003e\n\u003ctd\u003eapproximately 1.3 m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eActual consumption depends on the evenness, structure and absorbency of the substrate.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eProduct type:\u003c\/strong\u003e cement-based project levelling compound\u003cbr\u003e\u003cstrong\u003ePackaging:\u003c\/strong\u003e 20 kg paper bag\u003cbr\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e grey\u003cbr\u003e\u003cstrong\u003eLayer thickness:\u003c\/strong\u003e up to 10 mm\u003cbr\u003e\u003cstrong\u003eWater quantity:\u003c\/strong\u003e approximately 5 litres per bag\u003cbr\u003e\u003cstrong\u003eCoverage:\u003c\/strong\u003e approximately 1.5 kg\/m² per mm of layer thickness\u003cbr\u003e\u003cstrong\u003eWorking time:\u003c\/strong\u003e approximately 20 to 40 minutes\u003cbr\u003e\u003cstrong\u003eWalkable:\u003c\/strong\u003e after approximately 2 to 3 hours\u003cbr\u003e\u003cstrong\u003eReady for floor covering:\u003c\/strong\u003e after approximately 24 hours\u003cbr\u003e\u003cstrong\u003eIdeal floor temperature:\u003c\/strong\u003e 15 to 25 °C\u003cbr\u003e\u003cstrong\u003eMinimum floor temperature:\u003c\/strong\u003e 10 °C\u003cbr\u003e\u003cstrong\u003eFire classification:\u003c\/strong\u003e A1fl-s1\u003cbr\u003e\u003cstrong\u003eShelf life:\u003c\/strong\u003e at least 9 months\u003cbr\u003e\u003cstrong\u003eCertification:\u003c\/strong\u003e EMICODE EC 1 PLUS\u003cbr\u003e\u003cstrong\u003eQuantity per pallet:\u003c\/strong\u003e 54 bags\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eWhy choose UZIN NC 150?\u003c\/h3\u003e\n\u003cp\u003eUZIN NC 150 is a practical and economical levelling compound for standard levelling work in residential and commercial spaces. The product flows well, is easy to pump, and creates a smooth, absorbent surface for subsequent floor finishing.\u003c\/p\u003e\n\u003cp\u003eThe combination of good processing properties and broad applicability makes this levelling compound suitable for both smaller renovations and larger project floors.\u003c\/p\u003e","brand":"Uzin","offers":[{"title":"Default Title","offer_id":63283805520202,"sku":null,"price":54.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0969\/2194\/4394\/files\/uzinnc150.jpg?v=1787601374","url":"https:\/\/portofaltea.es\/fr\/products\/uzin-nc-150-projectegalisatie-20-kg","provider":"Port of Altea","version":"1.0","type":"link"}