{"product_id":"uzin-nc-580-fusiontec-egaline-20-kg","title":"UZIN NC 580 FusionTec Premium Self-Leveling Compound – 20 kg","description":"\u003cp class=\"PDq2pG_selectionAnchorContainer\"\u003eThe \u003cstrong\u003eUZIN NC 580 FusionTec\u003c\/strong\u003e is a high-quality, self-leveling compound for projects requiring an exceptionally strong substrate that is ready for flooring installation quickly. The product cures with virtually no tension, has an extremely high load-bearing capacity, and is suitable for layer thicknesses of \u003cstrong\u003e0 to 20 mm\u003c\/strong\u003e.\u003cspan class=\"PDq2pG_selectionAnchor\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThanks to its excellent flow properties, the leveling compound is easy to spread. Its rapid drying makes it possible to install the subsequent floor covering after a short time, even with thicker layers. UZIN NC 580 is suitable as a substrate for almost all floor coverings and parquet.\u003c\/p\u003e\n\u003cp\u003eDue to its high load-bearing capacity, the product can be used in homes, commercial buildings, and dry industrial areas.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eKey properties\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSelf-leveling with excellent flow properties\u003c\/li\u003e\n\u003cli\u003eSuitable for layer thicknesses from 0 to 20 mm\u003c\/li\u003e\n\u003cli\u003eExtremely high load-bearing capacity\u003c\/li\u003e\n\u003cli\u003eCures with virtually no tension\u003c\/li\u003e\n\u003cli\u003eWorking time of approximately 25 to 35 minutes\u003c\/li\u003e\n\u003cli\u003eWalkable after approximately 1 to 2 hours\u003c\/li\u003e\n\u003cli\u003eReady for flooring installation after approximately 6 hours\u003c\/li\u003e\n\u003cli\u003eReady for flooring installation quickly, even with thicker layers\u003c\/li\u003e\n\u003cli\u003eEasy to sand despite its high strength\u003c\/li\u003e\n\u003cli\u003eSuitable for manual application and pumping\u003c\/li\u003e\n\u003cli\u003eSuitable for underfloor heating\u003c\/li\u003e\n\u003cli\u003eFor indoor use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe stated times apply at approximately 20 °C and a relative humidity of 65%. Temperature, humidity, and layer thickness may affect the drying time.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eSuitable substrates\u003c\/h3\u003e\n\u003cp\u003eUZIN NC 580 FusionTec can be used, in combination with the appropriate preparation and primer, on substrates including:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSand-cement screeds\u003c\/li\u003e\n\u003cli\u003eAnhydrite and calcium sulfate screeds\u003c\/li\u003e\n\u003cli\u003eConcrete\u003c\/li\u003e\n\u003cli\u003eOld leveling compounds\u003c\/li\u003e\n\u003cli\u003eSubstrates with water-resistant adhesive residues\u003c\/li\u003e\n\u003cli\u003eWell-secured particleboards and OSB boards\u003c\/li\u003e\n\u003cli\u003eExisting and new mastic asphalt floors\u003c\/li\u003e\n\u003cli\u003eMagnesite and wood magnesite\u003c\/li\u003e\n\u003cli\u003eGypsum fiberboards\u003c\/li\u003e\n\u003cli\u003eTile floors\u003c\/li\u003e\n\u003cli\u003eNatural stone and terrazzo floors\u003c\/li\u003e\n\u003cli\u003eSubstrates with hot-water underfloor heating\u003c\/li\u003e\n\u003cli\u003eOld and mixed substrates in renovation projects\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFrom a layer thickness of 1 mm, the leveling compound is suitable for loads from swivel castors in accordance with DIN EN 12529.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eSubstrate preparation\u003c\/h3\u003e\n\u003cp\u003eThe substrate must be load-bearing, stable, permanently dry, clean, and free of cracks. Dust, dirt, grease, loose material, and other substances that may reduce adhesion must be completely removed.\u003c\/p\u003e\n\u003cp\u003eWeak or poorly bonded layers must be sanded, milled, or removed using another suitable method. Then vacuum the substrate thoroughly and treat it with a primer suitable for the substrate in question.\u003c\/p\u003e\n\u003cp\u003eAlways consult the current product data sheet and UZIN's application instructions before use.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eMixing and application\u003c\/h3\u003e\n\u003cp\u003ePour approximately \u003cstrong\u003e4 litres of clean, cold water\u003c\/strong\u003e into a clean mixing tub. Then gradually add the entire contents of the 20 kg bag.\u003c\/p\u003e\n\u003cp\u003eMix the material mechanically with a suitable basket mixer until a smooth, homogeneous, lump-free compound is obtained. Then pour the self-levelling compound onto the substrate and spread it evenly with a smoothing trowel or levelling rake.\u003c\/p\u003e\n\u003cp\u003eImmediately after spreading, use a spiked roller to remove air bubbles and achieve an even surface. Preferably apply the required layer thickness in a single operation.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eConsumption\u003c\/h3\u003e\n\u003cp\u003eAverage consumption is approximately \u003cstrong\u003e1.5 kg per m² per millimetre of layer thickness\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cdiv class=\"group TyagGW_tableContainer\"\u003e\n\u003cdiv class=\"TyagGW_tableWrapper flex flex-col-reverse w-fit\" tabindex=\"-1\"\u003e\n\u003ctable class=\"w-fit min-w-(--thread-content-width)\"\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth class=\"last:pe-10\"\u003eLayer thickness\u003c\/th\u003e\n\u003cth class=\"last:pe-10\"\u003eConsumption\u003c\/th\u003e\n\u003cth class=\"last:pe-10\"\u003eArea per 20 kg bag\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e1 mm\u003c\/td\u003e\n\u003ctd\u003eapproximately 1.5 kg\/m²\u003c\/td\u003e\n\u003ctd\u003eapproximately 13.3 m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e3 mm\u003c\/td\u003e\n\u003ctd\u003eapproximately 4.5 kg\/m²\u003c\/td\u003e\n\u003ctd\u003eapproximately 4.4 m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e10 mm\u003c\/td\u003e\n\u003ctd\u003eapproximately 15 kg\/m²\u003c\/td\u003e\n\u003ctd\u003eapproximately 1.3 m²\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cp\u003eActual consumption depends on the flatness, structure, and absorbency of the substrate.\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eProduct type:\u003c\/strong\u003e premium self-levelling compound\u003cbr\u003e\u003cstrong\u003ePackaging:\u003c\/strong\u003e 20 kg paper bag\u003cbr\u003e\u003cstrong\u003eColour:\u003c\/strong\u003e light grey\u003cbr\u003e\u003cstrong\u003eLayer thickness:\u003c\/strong\u003e 0 to 20 mm\u003cbr\u003e\u003cstrong\u003eWater quantity:\u003c\/strong\u003e approximately 4 litres per bag\u003cbr\u003e\u003cstrong\u003eConsumption:\u003c\/strong\u003e approximately 1.5 kg\/m² per mm layer thickness\u003cbr\u003e\u003cstrong\u003eWorking time:\u003c\/strong\u003e approximately 25 to 35 minutes\u003cbr\u003e\u003cstrong\u003eWalkable:\u003c\/strong\u003e after approximately 1 to 2 hours\u003cbr\u003e\u003cstrong\u003eReady for covering:\u003c\/strong\u003e after approximately 6 hours\u003cbr\u003e\u003cstrong\u003eIdeal application temperature:\u003c\/strong\u003e 15 to 25 °C\u003cbr\u003e\u003cstrong\u003eMinimum floor temperature:\u003c\/strong\u003e 15 °C\u003cbr\u003e\u003cstrong\u003eFire class:\u003c\/strong\u003e A1fl\u003cbr\u003e\u003cstrong\u003eShelf life:\u003c\/strong\u003e at least 12 months\u003cbr\u003e\u003cstrong\u003eQuantity per pallet:\u003c\/strong\u003e 54 bags\u003c\/p\u003e\n\u003chr\u003e\n\u003ch3\u003eWhy choose UZIN NC 580 FusionTec?\u003c\/h3\u003e\n\u003cp\u003eUZIN NC 580 was developed for situations where speed and load-bearing capacity are important. This self-levelling compound combines high final strength with rapid drying and excellent application properties.\u003c\/p\u003e\n\u003cp\u003eThis makes the product suitable for intensively used homes, shops, offices, commercial projects, and dry industrial spaces. It provides a strong, even base for virtually any subsequent floor finish.\u003c\/p\u003e","brand":"Uzin","offers":[{"title":"Default Title","offer_id":63283485278538,"sku":null,"price":64.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0969\/2194\/4394\/files\/uzinnc580.jpg?v=1787599471","url":"https:\/\/portofaltea.es\/da\/products\/uzin-nc-580-fusiontec-egaline-20-kg","provider":"Port of Altea","version":"1.0","type":"link"}